aeroplan01042014025.jpg aeroplan01042014023.jpg
aeroplan01042014024.jpg
aeroplan01042014271.gif
SAM - Span is
  • a heat shrink polyester tissue without adhesive backing
  • strong but light with a weight of 24g/m or 0,55g/cm and has a thickness of 0,04mm
aeroplan01042014270.gif
How to use Aeroplan SAM - Span
  1. Sand the structure of your model carefully and remove any dust.
  1. Using a small and soft brush, apply two to three coats of nitro-filler to all parts will come into
    contact with SAM - Span covering material, such as ribs, leading and trailing edges, spars,
    stringers etc.
  1. Leave each coat to dry overnight and sand between coats carefully with 400-grit sandpaper.
aeroplan01042014269.gif
  1. Apply SAM - Span to your model and use thinner ( acetone will do in most cases ) to back down
    the covering material on the structure.
aeroplan01042014268.gif
  1. Use a heat gun or covering iron to remove any remaining wrinkles after the first coat has
    dried. Be careful; excessive heat may lead to discolouration of doped covering
Roll of 5 meters ( 1000mm width ) .............................................................................................. 20,00
Roll of 10 meters ( 1000mm width ).............................................................................................. 35,00